MS environmental fast bonding sealant

Product Features

MS environmental protection fast bonding sealant is single component, with low modulus, high elongation, stress relief and other properties, good weather resistance, especially suitable for all kinds of building metal materials, aluminum plate, natural stone and concrete and other non-structural sealing.

The product is non-polluting and has excellent coloring performance to most paints and coatings, which greatly reduces the cost of post-maintenance.

Main Uses

MS environmental protection fast bonding sealant is suitable for kitchen bathroom, sanitary ware waterproof anti-mold bonding and sealing; insulation board one piece board, prefabricated board, concrete and other bonding and sealing; natural stone, aluminum plate and metal between the non-structural sealing.

Instructions for use

1、It is recommended to do compatibility test before use;

2、The construction environment must be kept air circulation;

3、Substrate bonding surface must be clean, to ensure no dust, no oil;

4, when injecting glue to ensure that the glue slurry fill the joints without gaps, and the surface of the glue slurry before curing for finishing.

Cautions

1、Storage away from children;

2, avoid contact with eyes, skin, such as contact with the skin can first wipe with a cloth, in the soap and water cleaning; such as inadvertent contact with the eyes, can first rinse with a lot of water as soon as possible after the treatment;

3, not suitable for building glass curtain wall;

4, waterproof and moisture-proof, careful and lightly placed, prohibit extrusion collision.

Transportation and storage

1、 Transportation: protect from moisture, rain, sun, heat, heat source, careful and light, no crushing and collision.

2、 Storage: sealed and stored in a ventilated and dry place, stored at a temperature lower than 27℃.

3、 Storage period: 9 months.

Color

White, 24 pieces in a box

Special Announcement

Storage, handling, and construction recommendations for the products under normal conditions of use are based on our current knowledge and experience, while in actual application, due to differences in the environment, materials used, and actual site conditions, we do not make any guarantees or assume any legal responsibility for any inference of the suitability of the products for particular uses from the data parameters in this table. In order to ensure the bonding effect and the compatibility of the product with the material, it is recommended to do the compatibility test on the actual substrate under the application environment in advance or consult our technical staff.