MS rock board bonding adhesive/composite adhesive

Product description

It is a one-component moisture-curing organosilane modified sealant with good sealing performance and flexibility, non-corrosive to the bonded substrate, non-polluting and non-polluting to the environment.

Product Features

1、Environmental protection, solvent-free, silicone oil-free, no pollution of the substrate, the surface can be painted.

2、High initial adsorption of rock slab bonding adhesive, convenient for quick positioning.

3、Good aging resistance of rock slab adhesive.

Product Use

MS rock board adhesive is mainly used for indoor rock board composite installation, decorative ceiling, gypsum board, wood plywood bonding and composite sealing; it can be applied to indoor home decorative strips and footings bonding.

Technical parameters

① Test data at 23±2℃ and 50±5%RH.

② The table drying time test value may vary depending on the ambient temperature and humidity.

Instructions for use

1、The surface of the sticky substrate must be clean and dry, no dust, oil and water stains.

2、The ambient temperature and humidity have great influence on the surface drying and curing of the sealant, the best construction environment temperature 5～35℃, humidity 50～70%RH.

3、The construction method can refer to the construction instructions or consult our technical personnel.

4、The node part can be trimmed and scraped by scraper or rigid foam strip, and part of the detail trim can be smoothed by soap and water.

Safety Precautions

1、Store away from children.

2. Avoid contact with eyes and skin. If contact with skin is accidental, wipe with a cloth first and then wash with soap; if contact with eyes is accidental, rinse with plenty of water and seek medical attention as soon as possible.

Package specification

1、310ml/stem, PE bottle packaging

2、600ml/stem, packed in aluminum film

3、25kg/drum, packed in PE drum

Storage and transportation

1、Transportation: protect from moisture, rain, sun, heat, heat source, careful and lightly, no crushing and collision.

2、Storage: sealed and stored in a low temperature, dry place, storage temperature 5~25℃, humidity ≤50%RH.

3、Storage period: 9 months.

Special Announcement

Storage, handling, and construction recommendations for the products under normal conditions of use are based on our current knowledge and experience, while in actual application, due to differences in the environment, materials used, and actual site conditions, we do not make any guarantees or assume any legal responsibility for any inference of the suitability of the products for particular uses from the data parameters in this table. In order to ensure the bonding effect and the compatibility of the product with the material, it is recommended to do the compatibility test on the actual substrate under the application environment in advance or consult our technical staff.